Proco Pen-Seal
The Proco Pen-Seal is designed to provide a gas and water-tight seal. All sizes have been tested to withstand a hydrostatic seal up to 20 psig or 40 feet of head pressure, in addition to withstanding temperatures up to 250 °F.
The Pen-Seal’s standard elastomer material is EPDM, but a Nitrile material is available if the seal may come in contact with hydrocarbons, oil, gas, jet fuel, or miscellaneous solvents.
The Pen-Seal utilizes glass-reinforced plastic, and all hardware is manufactured from steel zinc dichromate. For corrosion resistance, 316 stainless steel hardware is available.
For more information about the features and benefits of the Proco Pen-Seal, download our brochure:
For up-to-date pricing and availability information, contact PROCO today.
PenSeal Installation Animation
Table 1 | Standard Weight Steel or PVC Pipe Sleeve1 | Cast or Core Bit Drilled Hole1 | ||||||
NOMINAL PIPE SIZE |
ACTUAL PIPE O.D. |
SLEEVE NOMINAL PIPE SIZE |
SLEEVE ACTUAL I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
HOLE I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
0.5 | 0.840 | 2.000 | 2.067 | PS-200 | 4 | 2.000 | PS-200 | 4 |
0.75 | 1.050 | 2.500 | 2.469 | PS-275 | 6 | 2.500 | PS-275 | 6 |
1 | 1.315 | 2.500 | 2.469 | PS-200 | 5 | 3.000 | PS-315 | 4 |
1.25 | 1.660 | 3.000 | 3.068 | PS-275 | 8 | 3.000 | PS-275 | 8 |
1.5 | 1.900 | 3.000 | 3.068 | PS-200 | 7 | 3.500 | PS-300 | 5 |
2 | 2.375 | 3.500 | 3.548 | PS-200 | 8 | 4.000 | PS-300 | 6 |
2.5 | 2.875 | 4.000 | 4.026 | PS-200 | 9 | 4.000 | PS-200 | 9 |
3 | 3.500 | 5.000 | 5.047 | PS-300 | 8 | 5.000 | PS-300 | 8 |
3.5 | 4.000 | 6.000 | 6.065 | PS-315 | 10 | 6.000 | PS-315 | 10 |
4 | 4.500 | 6.000 | 6.065 | PS-300 | 10 | 6.000 | PS-300 | 10 |
5 | 5.563 | 8.000 | 7.981 | PS-340 | 13 | 8.000 | PS-340 | 13 |
6 | 6.625 | 10.000 | 10.020 | PS-475 | 10 | 10.000 | PS-475 | 10 |
8 | 8.625 | 12.000 | 12.000 | PS-475 | 12 | 12.000 | PS-475 | 12 |
10 | 10.750 | 14.000 | 13.250 | PS-425 | 10 | 14.000 | PS-475 | 14 |
12 | 12.750 | 16.000 | 15.250 | PS-425 | 12 | 16.000 | PS-475 | 17 |
14 | 14.000 | 18.000 | 17.250 | PS-475 | 18 | 18.000 | PS-575 | 16 |
16 | 16.000 | 20.000 | 19.250 | PS-475 | 21 | 20.000 | PS-575 | 18 |
18 | 18.000 | 22.000 | 21.250 | PS-475 | 23 | 22.000 | PS-575 | 20 |
20 | 20.000 | 24.000 | 23.250 | PS-475 | 25 | 24.000 | PS-575 | 22 |
22 | 22.000 | 26.000 | 25.250 | PS-475 | 28 | 26.000 | PS-575 | 24 |
24 | 24.000 | 28.000 | 27.250 | PS-475 | 30 | 28.000 | PS-575 | 26 |
26 | 26.000 | 30.000 | 29.250 | PS-475 | 33 | 30.000 | PS-575 | 28 |
28 | 28.000 | 32.000 | 31.250 | PS-475 | 35 | 32.000 | PS-575 | 30 |
30 | 30.000 | 34.000 | 33.250 | PS-475 | 37 | 34.000 | PS-575 | 32 |
32 | 32.000 | 36.000 | 35.250 | PS-475 | 40 | 36.000 | PS-575 | 34 |
34 | 34.000 | 40.000 | 39.250 | PS-500 | 29 | 38.000 | PS-575 | 36 |
36 | 36.000 | 42.000 | 41.250 | PS-500 | 31 | 40.000 | PS-575 | 38 |
42 | 42.000 | 48.000 | 47.250 | PS-500 | 36 | 46.000 | PS-575 | 44 |
48 | 48.000 | 54.000 | 53.250 | PS-500 | 41 | 52.000 | PS-575 | 50 |
NOTES:
1. Minimum recommended sleeve length or wall thickness is 4” for PEN-SEAL Model PS-325 and smaller and 6” for Models PS-400 and larger.
2. PEN-SEAL sets are sold in belts of ten (10) links.
Table 2 | Standard Weight Steel or PVC Pipe Sleeve 1 | Cast or Core Bit Drilled Hole 1 | ||||||
NOMINAL |
ACTUAL |
SLEEVE |
SLEEVE ACTUAL I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
HOLE I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
2 | 2.500 | 3.500 | 3.548 | PS-200 | 8 | 4.000 | PS-300 | 6 |
2.25 | 2.750 | 5.000 | 5.047 | PS-340 | 7 | 5.000 | PS-340 | 7 |
3 | 3.960 | 6.000 | 6.065 | PS-315 | 10 | 6.000 | PS-315 | 10 |
4 | 4.800 | 8.000 | 7.981 | PS-410 | 7 | 8.000 | PS-410 | 7 |
6 | 6.900 | 10.00 | 10.020 | PS-410 | 10 | 10.000 | PS-410 | 10 |
8 | 9.050 | 12.000 | 12.000 | PS-400 | 9 | 12.000 | PS-400 | 9 |
10 | 11.100 | 14.000 | 13.250 | PS-340 | 24 | 14.000 | PS-400 | 10 |
12 | 13.200 | 16.000 | 15.250 | PS-325 | 14 | 16.000 | PS-360 | 21 |
14 | 15.300 | 18.000 | 17.250 | PS-325 | 16 | 18.000 | PS-360 | 24 |
16 | 17.400 | 20.000 | 19.250 | PS-315 | 39 | 20.000 | PS-360 | 27 |
18 | 19.500 | 24.000 | 23.250 | PS-475 | 25 | 24.000 | PS-525 | 17 |
20 | 21.600 | 26.000 | 25.250 | PS-475 | 28 | 26.000 | PS-525 | 19 |
24 | 25.800 | 30.000 | 29.250 | PS-475 | 32 | 29.000 | PS-410 | 33 |
30 | 32.000 | 36.000 | 35.250 | PS-475 | 40 | 35.000 | PS-400 | 29 |
36 | 38.300 | 42.000 | 41.250 | PS-400 | 34 | 41.000 | PS-360 | 59 |
42 | 44.500 | 50.000 | 49.250 | PS-500 | 38 | 48.000 | PS-475 | 55 |
48 | 50.800 | 54.000 | 53.250 | PS-425 | 45 | 54.000 | PS-410 | 63 |
NOTES:
1. Minimum recommended sleeve length or wall thickness is 4” for Pen-Seal Model PS-325 and smaller and 6” for Models PS-400 and larger.
2. Pen-Seal sets are sold in belts of ten (10) links.
Table 3 | Standard Weight Steel or PVC Pipe Sleeve 1 | Cast or Core Bit Drilled Hole 1 | ||||||
NOMINAL PIPE SIZE |
ACTUAL PIPE O.D. |
SLEEVE NOMINAL PIPE SIZE |
SLEEVE ACTUAL I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
HOLE I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
0.5 | 0.625 | 2.000 | 2.067 | PS-275 | 4 | 2.000 | PS-275 | 4 |
0.75 | 0.875 | 2.000 | 2.067 | PS-200 | 4 | 2.000 | PS-200 | 4 |
1 | 1.125 | 2.500 | 2.469 | PS-275 | 6 | 3.000 | PS-315 | 4 |
1.25 | 1.375 | 2.500 | 2.469 | PS-200 | 5 | 3.000 | PS-300 | 4 |
1.5 | 1.625 | 3.000 | 3.068 | PS-275 | 8 | 3.000 | PS-275 | 8 |
2 | 2.125 | 3.500 | 3.548 | PS-300 | 5 | 3.500 | PS-275 | 9 |
2.5 | 2.625 | 4.000 | 4.026 | PS-275 | 11 | 4.000 | PS-275 | 11 |
3 | 3.125 | 5.000 | 5.047 | PS-315 | 8 | 5.000 | PS-315 | 8 |
4 | 4.125 | 6.000 | 6.065 | PS-315 | 10 | 6.000 | PS-315 | 10 |
6 | 6.125 | 8.000 | 7.981 | PS-315 | 15 | 8.000 | PS-315 | 15 |
8 | 8.125 | 10.000 | 10.020 | PS-325 | 9 | 12.000 | PS-575 | 10 |
10 | 10.125 | 14.000 | 13.250 | PS-410 | 14 | 14.000 | PS-575 | 12 |
12 | 12.125 | 16.000 | 15.250 | PS-410 | 16 | 16.000 | PS-575 | 14 |
NOTES:
1. Minimum recommended sleeve length or wall thickness is 4” for Pen-Seal Model PS-325 and smaller and 6” for Models PS-400 and larger.
2. Pen-Seal sets are sold in belts of ten (10) links.
Table 4 | Standard Weight Steel or PVC Pipe Sleeve 1 | Cast or Core Bit Drilled Hole 1 | ||||||
NOMINAL PIPE SIZE |
ACTUAL PIPE O.D. |
SLEEVE NOMINAL PIPE SIZE |
SLEEVE ACTUAL I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
HOLE I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
2 | 2.380 | 3.500 | 3.548 | PS-200 | 8 | 4.000 | PS-300 | 6 |
3 | 3.500 | 5.000 | 5.047 | PS-300 | 8 | 5.000 | PS-300 | 8 |
4 | 4.500 | 6.000 | 6.065 | PS-300 | 10 | 6.000 | PS-300 | 10 |
5 | 5.500 | 8.000 | 7.981 | PS-340 | 13 | 8.000 | PS-340 | 13 |
6 | 6.500 | 10.000 | 10.020 | PS-475 | 9 | 10.000 | PS-475 | 9 |
8 | 8.620 | 12.000 | 12.000 | PS-475 | 12 | 12.000 | PS-475 | 12 |
10 | 10.750 | 14.000 | 13.250 | PS-425 | 10 | 14.000 | PS-475 | 14 |
12 | 12.750 | 16.000 | 15.250 | PS-425 | 12 | 16.000 | PS-475 | 17 |
15 | 15.880 | 20.000 | 19.250 | PS-475 | 21 | 18.000 | PS-340 | 33 |
NOTES:
1. Minimum recommended sleeve length or wall thickness is 4” for Pen-Seal Model PS-325 and smaller and 6” for Models PS-400 and larger.
2. Pen-Seal sets are sold in belts of ten (10) links.
Table 5 | Standard Weight Steel or PVC Pipe Sleeve 1 | Cast or Core Bit Drilled Hole 1 | ||||||
NOMINAL PIPE SIZE |
ACTUAL PIPE O.D. |
SLEEVE NOMINAL PIPE SIZE |
SLEEVE ACTUAL I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
HOLE I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
2 | 2.300 | 4.000 | 4.026 | PS-315 | 6 | 4.000 | PS-315 | 6 |
3 | 3.300 | 5.000 | 5.047 | PS-315 | 9 | 5.000 | PS-315 | 8 |
4 | 4.300 | 6.000 | 6.065 | PS-315 | 11 | 6.000 | PS-315 | 11 |
5 | 5.300 | 8.000 | 7.981 | PS-360 | 10 | 8.000 | PS-360 | 10 |
6 | 6.300 | 8.000 | 7.981 | PS-315 | 15 | 8.000 | PS-315 | 15 |
8 | 8.380 | 12.000 | 12.000 | PS-475 | 12 | 12.000 | PS-475 | 12 |
10 | 10.500 | 14.000 | 13.250 | PS-360 | 17 | 14.000 | PS-475 | 14 |
12 | 12.500 | 16.000 | 15.250 | PS-360 | 20 | 16.000 | PS-475 | 17 |
15 | 15.620 | 20.000 | 19.250 | PS-475 | 20 | 18.000 | PS-425 | 14 |
NOTES:
1. Minimum recommended sleeve length or wall thickness is 4” for Pen-Seal Model PS-325 and smaller and 6” for Models PS-400 and larger.
2. Pen-Seal sets are sold in belts of ten (10) links.
Table 6 | Standard Weight Steel or PVC Pipe Sleeve 1 | Cast or Core Bit Drilled Hole 1 | ||||||
NOMINAL PIPE SIZE |
ACTUAL PIPE O.D. (Inches) |
SLEEVE NOMINAL PIPE SIZE |
SLEEVE ACTUAL I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
HOLE I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
0.5 | 0.706 | 2.000 | 2.067 | PS-275 | 4 | 2.000 | PS-275 | 4 |
0.75 | 0.922 | 2.000 | 2.067 | PS-200 | 4 | 2.000 | PS-200 | 4 |
1 | 1.163 | 2.500 | 2.469 | PS-275 | 6 | 3.000 | PS-315 | 4 |
1.25 | 1.510 | 3.000 | 3.068 | PS-275 | 7 | 3.000 | PS-275 | 7 |
1.5 | 1.740 | 3.500 | 3.548 | PS-315 | 5 | 3.500 | PS-315 | 5 |
2 | 2.197 | 3.500 | 3.548 | PS-275 | 10 | 4.000 | PS-315 | 6 |
2.5 | 2.875 | 4.000 | 4.026 | PS-200 | 9 | 4.000 | PS-200 | 9 |
3 | 3.500 | 5.000 | 5.047 | PS-300 | 8 | 5.000 | PS-300 | 8 |
4 | 4.500 | 6.000 | 6.065 | PS-300 | 10 | 6.000 | PS-300 | 10 |
NOTES:
1. Minimum recommended sleeve length or wall thickness is 4” for Pen-Seal Model PS-325 and smaller and 6” for Models PS-400 and larger.
2. Pen-Seal sets are sold in belts of ten (10) links.
Table 7 | Standard Weight Steel or PVC Pipe Sleeve 1 | Cast or Core Bit Drilled Hole 1 | ||||||
NOMINAL PIPE SIZE |
ACTUAL PIPE O.D. |
SLEEVE NOMINAL PIPE SIZE |
SLEEVE ACTUAL I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
HOLE I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
0.5 | 0.815 | 2.000 | 2.067 | PS-200 | 4 | 2.000 | PS-200 | 4 |
0.75 | 1.029 | 2.000 | 2.067 | PS-200 | 4 | 2.500 | PS-275 | 6 |
1 | 1.290 | 2.500 | 2.469 | PS-275 | 6 | 3.000 | PS-300 | 4 |
1.25 | 1.638 | 3.500 | 3.548 | PS-315 | 5 | 3.000 | PS-275 | 7 |
1.5 | 1.883 | 3.500 | 3.548 | PS-300 | 5 | 3.500 | PS-300 | 5 |
2 | 2.360 | 4.000 | 4.026 | PS-300 | 6 | 4.000 | PS-300 | 6 |
2.5 | 2.857 | 4.000 | 4.026 | PS-200 | 9 | 4.000 | PS-200 | 9 |
3 | 3.476 | 5.000 | 5.047 | PS-300 | 8 | 5.000 | PS-300 | 8 |
3.5 | 3.971 | 6.000 | 6.065 | PS-325 | 5 | 6.000 | PS-325 | 5 |
4 | 4.466 | 6.000 | 6.065 | PS-300 | 10 | 6.000 | PS-300 | 10 |
NOTES:
1. Minimum recommended sleeve length or wall thickness is 4” for Pen-Seal Model PS-325 and smaller and 6” for Models PS-400 and larger.
2. Pen-Seal sets are sold in belts of ten (10) links.
Table 8 | Standard Weight Steel or PVC Pipe Sleeve 1 | Cast or Core Bit Drilled Hole 1 | ||||||
NOMINAL PIPE SIZE |
ACTUAL PIPE O.D. |
SLEEVE NOMINAL PIPE SIZE |
SLEEVE ACTUAL I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
HOLE I.D. |
PEN-SEAL PART NUMBER | REQUIRED NUMBER OF LINKS |
0.5 | 0.840 | 2.000 | 2.067 | PS-200 | 4 | 2.000 | PS-200 | 4 |
0.75 | 1.050 | 2.500 | 2.469 | PS-275 | 6 | 2.500 | PS-275 | 6 |
1 | 1.315 | 2.500 | 2.469 | PS-200 | 5 | 3.000 | PS-300 | 4 |
1.25 | 1.660 | 3.500 | 3.548 | PS-315 | 5 | 3.000 | PS-275 | 7 |
1.5 | 1.900 | 3.500 | 3.548 | PS-300 | 5 | 3.500 | PS-200 | 5 |
2 | 2.375 | 4.000 | 4.026 | PS-300 | 6 | 4.000 | PS-300 | 6 |
2.5 | 2.875 | 4.000 | 4.026 | PS-200 | 9 | 4.000 | PS-200 | 9 |
3 | 3.500 | 5.000 | 5.047 | PS-300 | 8 | 5.000 | PS-300 | 8 |
3.5 | 4.000 | 6.000 | 6.065 | PS-325 | 5 | 6.000 | PS-325 | 5 |
4 | 4.500 | 6.000 | 6.065 | PS-300 | 10 | 6.000 | PS-300 | 10 |
5 | 5.563 | 8.000 | 7.981 | PS-425 | 6 | 8.000 | PS-425 | 6 |
6 | 6.625 | 8.000 | 7.981 | PS-300 | 15 | 10.000 | PS-475 | 10 |
NOTES:
1. Minimum recommended sleeve length or wall thickness is 4” for Pen-Seal Model PS-325 and smaller and 6” for Models PS-400 and larger.
2. Pen-Seal sets are sold in belts of ten (10) links.
SEALING RANGE | |||
SIZE |
NEUTRAL STATE THICKNESS |
EXPANDED STATE THICKNESS |
CHORD LENGTH |
200 | 0.500 | 0.620 | 1.125 |
275 | 0.620 | 0.800 | 0.910 |
300 | 0.710 | 0.920 | 1.510 |
315 | 0.820 | 1.100 | 1.470 |
325 | 0.940 | 1.140 | 3.100 |
340 | 1.050 | 1.330 | 1.570 |
360 | 1.290 | 1.650 | 2.106 |
400 | 1.430 | 1.870 | 3.625 |
410 | 1.480 | 1.910 | 2.600 |
425 | 1.130 | 1.430 | 3.625 |
475 | 1.620 | 2.080 | 2.625 |
500 | 2.370 | 2.810 | 3.860 |
525 | 2.180 | 2.580 | 3.860 |
575 | 1.880 | 2.350 | 3.100 |
600 | 3.200 | 4.000 | 6.000 |
Please Note: Pen-Seal sets are sold in belts of ten (10) links.
Materials Guide | |||||
TYPE | SEAL MATERIAL | PRESSURE PLATES | BOLTS & NUTS | TEMPERATURE RANGE (˚F) | APPLICATIONS |
E | EPDM Black | GLASS REINFORCED PLASTIC | STEEL Zinc Dichromate | -40˚ to +250˚ | Suitable for most application in water, above ground and direct burial. Provides electrical insulation where cathodic protection is required. |
ES | EPDM Black | GLASS REINFORCED PLASTIC | STAINLESS STEEL (316) | -40˚ to +250˚ | Suitable for environments where the corrosion resistance of stainless steel hardware is required. |
P | NITRILE | GLASS REINFORCED PLASTIC | STEEL Zinc Dichromate | -40˚ to +210˚ | Resistant to most hydrocarbons, oil, gas, jet fuel, and many solvents. |
PS | NITRILE | GLASS REINFORCED PLASTIC | STAINLESS STEEL (316) | -40˚ to +210˚ | Same as above, but with corrosion resistance of stainless steel hardware. |
K | SILICONE | STEEL Zinc Dichromate | STEEL Zinc Dichromate | -40˚ to +400˚ | High temperature applications. |
Standard steel wall sleeves are positioned in the wall before the concrete is poured. Wall sleeves offer a cleaner installation for every engineered piping system.
SLEEVE NOMINAL PIPE SIZE |
SLEEVE ACTUAL I.D. |
STANDARD SLEEVE LENGTH |
STANDARD WATERSTOP HEIGHT |
SLEEVE WEIGHT |
STEEL | ||||
2.00 | 2.07 | 12.00 | 2.00 | 6.00 |
2.50 | 2.47 | 12.00 | 2.00 | 8.00 |
3.00 | 3.07 | 12.00 | 2.00 | 10.00 |
3.50 | 3.55 | 12.00 | 2.00 | 12.00 |
4.00 | 4.03 | 12.00 | 2.00 | 14.00 |
5.00 | 5.05 | 12.00 | 2.00 | 18.00 |
6.00 | 6.07 | 12.00 | 2.00 | 23.00 |
8.00 | 7.98 | 12.00 | 2.00 | 34.00 |
10.00 | 10.02 | 12.00 | 2.00 | 47.00 |
12.00 | 12.00 | 12.00 | 2.00 | 57.00 |
14.00 | 13.25 | 12.00 | 2.00 | 62.00 |
16.00 | 15.25 | 12.00 | 2.00 | 72.00 |
18.00 | 17.25 | 12.00 | 2.00 | 80.00 |
20.00 | 19.25 | 12.00 | 2.00 | T.B.D. |
22.00 | 21.25 | 12.00 | 2.00 | T.B.D. |
24.00 | 23.25 | 12.00 | 2.00 | T.B.D. |
26.00 | 25.25 | 12.00 | 2.00 | T.B.D. |
28.00 | 27.25 | 12.00 | 2.00 | T.B.D. |
30.00 | 29.25 | 12.00 | 2.00 | T.B.D. |
32.00 | 31.25 | 12.00 | 2.00 | T.B.D. |
34.00 | 33.25 | 12.00 | 2.00 | T.B.D. |
36.00 | 35.25 | 12.00 | 2.00 | T.B.D. |
38.00 | 37.25 | 12.00 | 2.00 | T.B.D. |
40.00 | 39.25 | 12.00 | 2.00 | T.B.D. |
42.00 | 41.25 | 12.00 | 2.00 | T.B.D. |
44.00 | 43.25 | 12.00 | 2.00 | T.B.D. |
46.00 | 45.25 | 12.00 | 2.00 | T.B.D. |
48.00 | 47.25 | 12.00 | 2.00 | T.B.D. |
50.00 | 49.25 | 12.00 | 2.00 | T.B.D. |
52.00 | 51.25 | 12.00 | 2.00 | T.B.D. |
54.00 | 53.25 | 12.00 | 2.00 | T.B.D. |